If you have a fire or water emergency, please call us now at (615) 849-9794

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

6 Things You Should Do After a Water Damage Disaster

1/21/2019 (Permalink)

Water in unwanted places is never a good thing.

Whether it’s a leaky pipe, a rainstorm or flood, water damage can cause all sorts of headaches for homeowners. Aside from causing permanent damage to your home, a water disaster can lead to significant health and safety issues.

When it comes to flooding and other water disasters in a home, prevention is always the best course of action. However, even with enough precautions, there are cases where water disasters still occur.

You are probably asking, what can I do after significant water damage? Here are the things that you should do after a significant water disaster.

What Should You Do After a Major Water Damage?

1. Stop the Flow of Water

If the damage is caused by a water heater failure or a burst pipe, the very first thing that you should do is to shut off the main water valve for your home. This is why it’s important that you know where your main valve is.

If you are unable to locate the main water valve, call a professional as soon as you can.

2. Avoid Additional Risks

If you had to leave your home during the flooding, always remember to practice safety before you enter it when you come back.

The Federal Emergency Management Agency advises that you should check for any visible structural damage such as cracked foundation, warping, cracks, and holes before you enter your home. If you think that there’s damage to your water, electric, gas, and sewer lines, immediately contact a professional utility company.

At this point, make sure that you have a working flashlight for doing the following steps.

3. Cut the Power and Save Electronics

Time is of the essence when dealing with the aftermath of water damage.

If you want to save your electronics, you should act fast and get them out of water’s way. For starters, you should disconnect the power immediately. This is important for obvious safety reasons especially if the water has risen above the electrical outlets. Then, you’ll definitely want to move all your electrical devices first. After that, you can proceed to move the furniture and other movable items.

4. Get Rid of the Water

There are numerous ways to remove the water inside your home.

If you have no power or are worried about loose wires, you can always do it manually. The old-fashioned way of using towels, buckets and mops should work fine. You can then pour the water down the drain as long as the neighborhood isn’t backed up. Otherwise, you can pour the flood water onto your yard.

You may also use a wet or dry vacuum, but you should be wary about which electrical outlets to use. Make sure that you use an outlet that’s out of the water’s way. Avoid using an extension cord since the connection could short out which could lead to an unpleasant shock.

If the water is simply too much, renting a sump pump from your local hardware store is your best bet.

5. Dry Out the Affected Area

Once you have managed to remove the water, it’s time to dry out the area to prevent mold growth and prevent the moisture from doing more damage.

Use fans and dehumidifier for drying out the flooded area. You may also open all the windows for better air circulation, provided that it’s not raining anymore.

On your basement, check if the water damage has affected the drywall. If that is the case, you should consider cutting out the affected area since it’s basically free food for mold.

6. Disinfect the Affected Area

Once the damaged materials are removed, disinfect the affected area to prevent mold growth. The most commonly used disinfectant is a bleach solution. There are also other homemade disinfectants that you can easily make and use. Lightly spray and wipe down all the affected area before doing any repairs or restoration.

Get Top-Notch Water Damage Restoration in Rutherford County

If you have experienced water damage, hopefully, you’re dealing with clean water and a relatively small area. Dealing with a water-damaged home is certainly no joke. If you don’t know what you are doing, you can easily cause permanent damage and even put yourself at risk.

With that said, you can always call a professional water damage service to help you out. If you require a reliable water damage cleanup and restoration service, feel free to give SERVPRO in Rutherford County a call.

Other News

View Recent Posts